Warped Vents


AZGT

GT Owner
Mark IV Lifetime
Dec 20, 2005
1,354
Scottsdale, AZ.
Carbon Fiber should be about $300 each and match factory originals

That would be a good option. I plan on having the first of my aluminum vents in about 3 weeks - will post pictures as soon as available. The CF would be good for those (BONY) that get CF wood.

I would be a player on some aluminum vents if you can get them close enough to spec. The original vents have a nasty little arch to them that I would imagine is hard to replicate on a CNC machine.

The ones I am doing will be close enough to OEM that they will look like they should. Originally had ideas for various types of modified vents (see earlier posts), but there did not seem to be much interest in those.

The new ones will be cast - the CNC seemed to be prohibitively expensive (as jtedm89 indicted) due to curves, cutting louvers, etc. Will be available either powder coated the black of the grills so maybe no painting needed, or left bare aluminum for those that want to paint.

And just as a teaser, I also have another small item in the works that some of you will like. More on that to come.
 

SteveA

GT Owner/B.O.D
Mark IV Lifetime
Dec 13, 2005
3,697
Sandpoint Id
Just like on Prom night, I HATE A TEASE! Give it up!:lol
 

AZGT

GT Owner
Mark IV Lifetime
Dec 20, 2005
1,354
Scottsdale, AZ.
Just like on Prom night, I HATE A TEASE! Give it up!:lol


Nope, also like prom night. You've got to beg and pay............. :wink

Hope to be able to give some specifics on it this week, but a short week so we'll see.
 

jdoc7

GT Owner #1872
Mark II Lifetime
Jan 7, 2007
404
Central, Illinois
I'd be interested in carbon fiber vents
 
J

jtedm89

Guest
Vents

I will have vents in 8 weeks depending on the interest of how many GT owner want them. They will be just like OEM. Also they will be about 300 each.

Mike
 

FLY GT40

GT Owner
Jul 14, 2006
300
So. Ca.
Seems to me, the only vents I have seen warped are the ones that have had Acufab rear exhausts placed. I may be wrong, but I have not seen warping on the stock GT exhausts.

Not so.:thumbsdow My vent on the drivers side next to the rear window is warped. stock except for the trans cooler on the other side. :confused:frown
Fly GT40
 

MAD IN NC

Proud Owner/ BOD blah bla
Mark IV Lifetime
Feb 14, 2006
4,219
North Carolina
I will have vents in 8 weeks depending on the interest of how many GT owner want them. They will be just like OEM. Also they will be about 300 each.

Mike

Great - Who are you? Have you been here before? Do you own a FGT? Are you jtedm from Wisconsin who was banned?

Other items you should be made aware of:
1/ This vent issue has been worked on by many including AZGT (Larry), Steve592, John M. @ Accufab and probably others.
2/ The cost from Ford for replacements is less than $300 ea. via Maurice or Torrie.

Excuse my mistrust but this was your third post and now you will have a miracle vent. Do you even know of the problem and why they are warping? Do you know of the additional heat indexing due to stock versus aftermarket mufflers?

Inquiring minds need to know! You might have an answer but 8 wks @ $300 ea. is to easy of an answer.... If they work - I apoligize but many have spent many hours to no solution yet..... More Info please! And if you have a GT, sign the register and welcome!
 
Last edited:

B O N Y

MODERATOR & FGT OWNER
Mark IV Lifetime
Sep 5, 2005
12,110
Fresno, Ca.
I will have vents in 8 weeks depending on the interest of how many GT owner want them. They will be just like OEM. Also they will be about 300 each.

Mike

By and chance did you read our policies of selling on this forum?
Guess not?

Who in the hell are you? I have deleted your account, eliminated the 6 pm's in your in box and any you have sent.

Please contact DBK at once.

You will note that you have been banned until some questions have been answwered.

Thanks!
Moderator
 
Last edited:

AZGT

GT Owner
Mark IV Lifetime
Dec 20, 2005
1,354
Scottsdale, AZ.
An update.

Top vent model is being made as we speak. Saw it yesterday - looking very good. Guys are doing nice work.

I'm pressing to have an (aluminum) example by the B-J dinner, but that may be cutting it too close - we'll see.
 

Dino

Ford GT Owner
Mark II Lifetime
Sep 23, 2006
164
Queens, NY
does anyone have the part number for ther original side vents
 

KJRGT

GT Owner
Mark II Lifetime
May 4, 2006
2,840
SoCal
Dino, the number for the black plastic vents located on each side of the rear window is 6B670. I just ordered a set this week.
The paperwork from the dealer that replaced the two sets of louvers below the rear window show the following numbers:
5G7Z, 63403F22 and F23 for the outer black louvers
5G7Z, 403F18 for the center louvers.
The louver numbers are inconsistent, but hopefully that gives you a start.:thumbsup
 

AZGT

GT Owner
Mark IV Lifetime
Dec 20, 2005
1,354
Scottsdale, AZ.
KJRGT is right on the side plastic black vents

5G7Z 63403F22 AAA
5G7Z 63403F23 AAA

They are right and left (top two are the same number). I think they actually have a different price for each one. Go figure.........
 

Dino

Ford GT Owner
Mark II Lifetime
Sep 23, 2006
164
Queens, NY
Thanks fellas
 

Kingman

GT Owner
Mark II Lifetime
Aug 11, 2006
4,072
Surf City, USA
...any updates as to when some will become available?
 

AZGT

GT Owner
Mark IV Lifetime
Dec 20, 2005
1,354
Scottsdale, AZ.
Any day now - they did the first mold to get ready to do the preliminary cast aluminum, but wantd to make a couple of small adjustments / modifications to it. I am hopeful the first aluminum prototype will be done this week. Keep your fingers crossed - pictures will be up as soon as I have something :thumbsup
 

AZGT

GT Owner
Mark IV Lifetime
Dec 20, 2005
1,354
Scottsdale, AZ.
Update

Here we go - they are set to cast the first aluminum one tomorrow (Friday). :banana:banana:banana:banana:banana

Little tricky just because of all the ribs / slats. They may need to do some mold tweaking after they see the outcome, but we are making progress.

If all goes well, we are on the way to having the top vents to start, side vents to follow.
 

cobrar1339

GT Owner
Mark IV Lifetime
Feb 2, 2006
956
Diamond Bar, Ca
Congrats on the progress !


Observation / Question:
Those side ones are tricky to install. The shape is odd and they have to be bent and wiggled into place. If you don't get it just right they tend to bow in some spots. Like Ford made them a couple thou to big.

Have you seen damage to these?. Maybe I missed something along the way.
 

AZGT

GT Owner
Mark IV Lifetime
Dec 20, 2005
1,354
Scottsdale, AZ.
Congrats on the progress !


Observation / Question:
Those side ones are tricky to install. The shape is odd and they have to be bent and wiggled into place. If you don't get it just right they tend to bow in some spots. Like Ford made them a couple thou to big.

Have you seen damage to these?. Maybe I missed something along the way.

Thanks.

The sides do warp. Main thing is to make sure you have the bottom "tabs" hooked before screwing them down. I have not had any problem putting the stock sides on.

They will also come in aluminum following the top vents.
 

AZGT

GT Owner
Mark IV Lifetime
Dec 20, 2005
1,354
Scottsdale, AZ.
We Have Vent

Latest update.

They did cast last Friday, but had some issues, and cast two more times. The third was the charm.

I have in my hands the first CAST ALUMINUM TOP CLAMSHELL VENT. Looks real good. :banana :banana :banana

I need to do the typical casting cleanup on the gating and flashing, then will post come pictures as soon as I do the real test of putting it on the car. If the fit is right (it should be - looks to even have the correct curve), we are set to go. :cheers
 
Last edited:

Blue GT

GT Owner
Mar 20, 2007
48
Washington State
Insulating exhaust reduces the life expectancy of the exhaust

Our prior experience with wrapping exhaust will shorten the life of the exhaust. Wrapping exhaust creates more corrosion and heat in the exhaust system than non wrapped exhaust. my 2 cents