Wheel Bearing Hub

[WhippleGT]

Dear members,
I noticed that on the both wheel bearing hubs (front) one bolt at a time was shortenend. (see pic) What reason could that be?
Regards

 

[DakotaGT]

Somebody trying to use an incorrect lug nut?

 

[twobjshelbys]

Are you referring to the one in the front that has more thread? Both sides, correct? Is it possible this was for a locking hub nut?

 

[nota4re]

Are you referring to the one in the front that has more thread? Both sides, correct? Is it possible this was for a locking hub nut?

That was a real head scratcher, but I think Tony nailed it. It was probable shortened to accommodate a wheel lock. Good one, Tony!

 

[twobjshelbys]

That was a real head scratcher, but I think Tony nailed it. It was probable shortened to accommodate a wheel lock. Good one, Tony!

It's hard to tell in the picture but i don't know if the bolt is shorter or merely has more threads where the other ones have a shoulder.

 

[WhippleGT]

Are you referring to the one in the front that has more thread? Both sides, correct? Is it possible this was for a locking hub nut?

Yes, the one in front with more thread on both sides.
The original nuts were installed when the vehicle was purchased

 

[JamesOlivas]

Dear members,
I noticed that on the both wheel bearing hubs (front) one bolt at a time was shortenend. (see pic) What reason could that be?
Regards

All good now?

Edit: Thanks for the update.

 

[WhippleGT]

All good now?

Yes, I replaced the wrong bolts.