Anybody successfully repair broken HVAC AC blend door (stripped gears) or have a spare unit?


medici78

GT Owner
Dec 31, 2006
99
El Paso, TX
So we had a hell of a time figuring out the blend door issue and decided to hold off ripping the dash out due to the fact we have no clue if the A/C unit would even be repairable.
Has anyone actually repaired a broken unit?
 
Subscribing, Having problems with Heat myself.
 
Rich GTG replaced my HVAC unit in my ‘05 last August. I left him my old unit to use for spare parts. You might check with him to see what parts are salvageable.
 
You can buy the motor and gearbox unit from ford, not that expensive, there are 3 different ones if I remember correctly. Let me know if you need more info.
 
  • Like
Reactions: medici78
Ill be back home on the 21st June
 
  • Like
Reactions: medici78
Capture.JPG
 
Is that a Autonation screen grab?

Are all 3 motors the same?
 
I think there are a few minor differences. Check the part numbers to the descriptions
 
Is that a Autonation screen grab?.
Looks like Ford Fast parts giant.
 
this shows the 2 different motors, 3 are the same and the 4th one is different
 

Attachments

  • Capturegt.PNG
    Capturegt.PNG
    131.6 KB · Views: 13
Is It one of those jobs that if you need to replace one, you'd be better off doing all of them?
 
Last edited:
Doubt it. This seems to only happen to cars in the Southwest or warmer climates where the heaters don't get used much.
Thanks, Xcentric and ultrasportracing! I understand this is inaccessible unless the HVAC unit is removed. Once removed, is the HVAC unit servicable from the exterior, or does the unit need to be cracked open/disassembled?
 
Last edited:
hope this helps
 

Attachments

  • P1010051.JPG
    P1010051.JPG
    836.2 KB · Views: 21
  • P1010034.JPG
    P1010034.JPG
    840.9 KB · Views: 21
  • P1010048.JPG
    P1010048.JPG
    798.4 KB · Views: 21
Thank you! I was wondering if it was internal or external. Looks like there might be a challenge as far as to why the rivets are used vs screws or bolts.
 
Maybe check with the original vendor that designed the unit as well

https://www.vintageair.com/
 
Maybe check with the original vendor that designed the unit as well

https://www.vintageair.com/

We tried that route. Let’s just say they weren’t keen...