Professional GT Fender Emblems - Finally.

[HHGT]

Well I have been looking for a professional piece for a while and I think I may have found the solution.

Their prices are reasonable with a large run, sub $250.00 per set and I am talking professional pieces. The most difficult part of this task will be getting everyone to agree on a design. For me personally a GTX1 like design that incorporates the US Flag is my basic criteria.

I am more than happy to take this on, but I need a consensus on what every one thinks. We will probably need about 50 in commitments, so let me know.

Here is a sample;

 

[B O N Y]

How about a round one with the BMW colors and our serial number on each one?

Seriously, Sam, I like your idea, I would support it and order a set.

 

[dbk]

Why don't I ask Camilo to design it? I have no idea if he's into the idea or not, but I'll ask.

 

[MWG]

Here's the GTX1 badge you referenced. I like the idea as well.

 

[gtinmyblood]

Why don't I ask Camilo to design it? I have no idea if he's into the idea or not, but I'll ask.

Great Idea Dave!

 

[Gulf GT]

Excellent idea Sam, I would be in.

 

[gtinmyblood]

If we did a special one for specifically the Heritage model I would l be willing to commit to underwriting the lot of 50 or whatever it took to make up the difference between orders and minimums If Camillo would design it.

 

[B O N Y]

see what you started Sam!!
thanks!!

 

[MAD IN NC]

Cool!

Can I get a set to match the clamshell vents :rofl

Kidding Sam! Great Idea! :cheers

 

[pe2unia]

I like the idea especially if you could personalize them. I will be in for one:thumbsup Thanks

 

[AlohaGT]

I we did a special one for specifically the Heritage model I would l be willing to commit to underwriting the lot of 50 or whatever it took to make up the difference between orders and minimums If Camillo would design it.

I'm in. :thumbsup

 

[HHGT]

Here's the GTX1 badge you referenced. I like the idea as well.

Thanks for posting the picture. How are they mounted? 3 M tape or drilled into the fender (I hope not)?

 

[Spirit]

Sam - Yes, I'm In.:thumbsup

 

[MWG]

Thanks for posting the picture. How are they mounted? 3 M tape or drilled into the fender (I hope not)?

not sure how they're mounted.....saw this one at the Indy 500 gathering

 

[PeakCompletions]

I am interested in a Camilo designed fender emblem as well...

 

[Shadowman]

Well I have been looking for a professional piece for a while and I think I may have found the solution.

Their prices are reasonable with a large run, sub $250.00 per set and I am talking professional pieces. The most difficult part of this task will be getting everyone to agree on a design. For me personally a GTX1 like design that incorporates the US Flag is my basic criteria.

I am more than happy to take this on, but I need a consensus on what every one thinks. We will probably need about 50 in commitments, so let me know.

Here is a sample;

Very nice and classy looking with nostalgic feel to it

As for the manner in which the "G" emblems were attached; foam tape as I have had them off and on with no damage to the fender

Takes

Shadowman

 

[tpraceman]

If any life time forum member wants something laser engraved, let me know what you want and I will have my test engraving lab do it for you at no charge.

 

[fjpikul]

Raceman, can we get IndyGT, MAD in NC and Ralphie's foreheads lasered to say engineer?

 

[tpraceman]

Once you remove the brain I could Cauterize for you.....or engrave the staples with the VIN number

 

[HHGT]

Why don't I ask Camilo to design it? I have no idea if he's into the idea or not, but I'll ask.

Let me know Dave.