Ford GTs so far

[Apollo]

2019 Heritage!
[video=youtube;TEb7KZSVM3A]https://www.youtube.com/watch?v=TEb7KZSVM3A[/video]

 

[MJSFRX]

Great Color Ed. Happy for you.

 

[texas mongrel]

Crappy Iphone pix of mine with it’s brother in petrol. K0029, first production Lightweight, liquid blue, red calipers, all awesome.

 

[DakotaGT]

Great pictures, both are beautiful. Congratulations! They look even more like siblings from the rear, with your high-exit exhaust on your "old" GT.

 

[tpraceman]

Droid help on the way

Sent from my SM-G930V using Tapatalk

 

[fjpikul]

Battery charger hook up

This the pigtail installed to eliminate the alligator clamp charging wires.

 

[john gourley]

How did you attach the ctek positive lead to the post?

 

[THamonGT]

More details as to connection and product purchase!

 

[Howard]

I just connected a C-TEK hot lead to the battery cable, at the battery. I also took the opportunity to add a second ground strap to the chassis.

 

[SYCO GT]

2019 Ford GT #K014

Ed

Re-entry interior. For 2019 the entire seat side bolsters are off-white & the centers are leather. Charge port in rear storage compartment for '19. Custom color: Golden Yellow Metallic.

Congrats on K014! Does it somewhat match the little GT model I sent you? I love your interior, nice stylish contrast between bolster and center.

 

[fjpikul]

It is a ctek pigtail. Check their website or Amazon. It cost $8. I bought the infused version. The fused is only a few dollars more. The ground bolt nut comes off easily. I think it was a 10 mm socket. To get at the positive bolt, take off the red plastic cap but don't break the strap holding it on. Next, pry off the fuse box cover that covers the bottom of the positive post. It takes a little jiggling to get it off. you will see the nut to attach the pigtail to. I think it was 1/2 in box end wrench to loosen. It comes off easily, just don't drop it. Put the ring end on the bolt, put nut back on and tighten. There are witness marks and they won't match up. Do the same on the negative post. Put the red plastic cover back on the positive terminal where you used to attach the alligator clamps. Just watch hoe you run the red wire and it will fit nicely. The ctek part is Comfort Connect M8 8.4 mm, length 400 mm.

 

[fjpikul]

I would be remiss if I did not give credit to StormCat. I did discuss with him before doing this.

 

[maxemus]

Anybody know anything about this blue car? God I love that color!!!!!


Sent from my iPhone using Tapatalk

 

[john gourley]

Thank you and Stormy for pig tail details

 

[Ed Sims]

Congrats on K014! Does it somewhat match the little GT model I sent you? ....

It does! I have a photo of the car & model posted in my thread in the Owner's Section.

Ed

 

[Ed Sims]

....Anybody know anything about this blue car? God I love that color!!!!!

LOL! That's Vince's Yachting Blue Metallic NGT! It is a very cool color. I've seen it in person.

Protective Film Solutions is in Orange County, SoCal. It is a big shop. They clear wrapped Leno's NGT for TV. They are also opening a new shop near me in the SF Bay Area. I'm not big fans of theirs but they do reel in the celebrities. I prefer Evan Rowe of Auto Armour in San Diego. They've done multiple NGTs & are doing mine as I write this. Also Evan's guy who does custom cut Clearplex for windshields is amazing.

https://autoarmour.com/

Ed

 

[davidn]

Saw this one at the shop i use the other day ......jerry jones's car ....

 

[Specracer]

^^^ I'd have to say that color scheme is appropriate for that owner.....

 

[Vince H]

Anybody know anything about this blue car? God I love that color!!!!!


Sent from my iPhone using Tapatalk

That’s mine. Svensson Petrol Grey!

Vince H

 

[AJB]

Vince … that certainly looks different than your first delivery pics... MORE BLUE....which is always good !!!
I like it.
Is it truly more blue than gray... or just the picture and camera this time ??
andy (ajb)