Cut-away of fuel filter after 13 years


Art138

GT Owner
Mark II Lifetime
Jan 4, 2011
632
Weston,FL
I took the plunge and replaced the fuel filter today. It was quiet therapeutic. I meant to do this several years ago. After thirteenth years on a 4000 mile car I was curious about the integrity of the inside. I cut the filter in two pieces exposing the paper element. I would highly suggest changing the item if you have not done so since new. I found the paper structure extremely subtle and paper can only last so long. I took several pics of the process of replacing it. Several threads on the subject but no pics.
 

Attachments

  • 73AB6584-1185-40D1-AA28-436B09E37C16.jpeg
    73AB6584-1185-40D1-AA28-436B09E37C16.jpeg
    1.4 MB · Views: 141
  • 243A89A8-147E-4CD6-902C-3D4ED773398A.jpeg
    243A89A8-147E-4CD6-902C-3D4ED773398A.jpeg
    1.4 MB · Views: 136

nota4re

GT Owner
Mark IV Lifetime
Le Mans 2010 Supporter
Feb 15, 2006
4,291
Very good suggestion. We've been replacing them on all cars we have been servicing - irrespective of mileage for the last year or so. Suspected (but did not verify) that gasoline on paper for 15 years straight is probably not a good thing! A relatively low-cost "must" maintenance item.
 
Last edited:

Art138

GT Owner
Mark II Lifetime
Jan 4, 2011
632
Weston,FL
Nota4re: And I did not have to remove your trans cooler.
 

Attachments

  • 36433836-B572-4B92-BC73-6BEF4BB5D391.jpeg
    36433836-B572-4B92-BC73-6BEF4BB5D391.jpeg
    1.7 MB · Views: 73
  • 85CD2F75-CB89-4E4A-B6E1-5B7A2A974826.jpeg
    85CD2F75-CB89-4E4A-B6E1-5B7A2A974826.jpeg
    1.3 MB · Views: 71

Beez

GT Owner
Mark II Lifetime
Oct 28, 2016
195
South Denver
Art, thanks for the tip ; adding to the to-do list
 

HighHP

GT Owner
Jun 3, 2019
471
Spokane, WA
Changed mine recently after 15 years and 20,000 miles. I cut mine open with paper filter intact. Rinsed the filter in lacquer thinner. Paper filter was in fine shape, I was surprised at the amount of fine debris in the filter, however.
 

KJRGT

GT Owner
Mark II Lifetime
May 4, 2006
2,840
SoCal
I did mine a few years ago. Took me quite a while to research how with those tools, then to make it happen without pulling trans cooler.
 

PeteK

GT Owner
Mark II Lifetime
Apr 18, 2014
2,488
Kalama, Free part of WA State
If anyone wants to do this again, cut off the top of the can, rather than through the middle and remove the filter element, then cut the top and bottom of the actual filter off, then lay out the paper folds to inspect for particles. Aircraft practice. They even have a special tool for cutting open filters without making a bunch more particles.
 
  • Like
Reactions: jammer and Art138