Does the center armrest pop out? How does it come off? I don't want to mess around and damage it. Anyone know how to safely remove it so that I can put it back later?:confused
Thanks!
Thanks!
Black Center Armrest removal?
- Thread starter UB2SLOW
- Start date
Triheart7
GT Owner
Its double-sided taped on.
If you apply the right amount of pressure it should come off without harm.
If you apply the right amount of pressure it should come off without harm.
Kip Ewing
CF Vendor
Arm rest removal
The arm rest is held in with 4 metal spring clips that press into the magnesium center tunnel.
These spring clips are on a molded plastic carrier that is glued to the Azdel (lofted fiberglass) substrait that is wraped with black leather.
To remove it properly, without damage, you'd want to remove the tunnel from the car, or at least loosen it up and raise the back to get access to the spring clips.
The arm rest is held in with 4 metal spring clips that press into the magnesium center tunnel.
These spring clips are on a molded plastic carrier that is glued to the Azdel (lofted fiberglass) substrait that is wraped with black leather.
To remove it properly, without damage, you'd want to remove the tunnel from the car, or at least loosen it up and raise the back to get access to the spring clips.
Kip, of course, is absolutely right. Not to spoil the surprise, but when you get it off, there's simply a solid flat piece of magnesium tunnel underneath it. Just 4 ~3/4" slits for the clips to go through. It is easy enough to remove once the entire console is removed from the car.
Thanks guys...It is always nice to know what is holding these things on before hand. Your knowledge is much appreciated!
Kip is right. Not sure if I had a brain fart for a moment or what as we have removed this part several times (think I had door panel rings on my mind for some reason) And yes, there is nothing but a flat piece of metal under the arm rest.