Remove the horn/airbag assembly as follows; (Disconnect negative cable on battery first.)
1. Remove the two ~.75" diameter plastic "plugs" from behind the steering wheel
2. Use an 8mm socket on a 1/4" ratchet to remove the two 8mm fasteners
3. The horn/airbag assembly can now be pulled forward and you can un-plug the two connectors to the airbag
4. Pace the assembly facedown on a workbench and carefully remove the small nuts securing the airbag to the steering wheel
5. Lift the airbag module out and set it aside.
6. Ship the remaining assembly to Shelby at Elite Autos LLC.
7. In a few days, you'll have it back in perfect condition and you can re-assemble