Have to get a radar detector in place. 12 volt plug is on right side of center console. Doesn't work aesthetically. Opened up upper light console. Four press in fittings (be careful they will try to fall out into the least accessible cracks of the seat when trim is pulled off). Plug into map light...blk on left of plug is ground and I hooked the inside -middle wire to +12 supply. It may be the outside wire-will report soon.First picture shows the FIA roll bar along top of windshield (after just pulling the trim straight out). Photo 2 shows the press in clip just to the right of the light (they do no stay in place when you pull trim out) and #3 shows the ZHE connector (black to the left is ground and middle wire may be 12v on when car is running). A friend insisted on helping me detailing the nfgt ,then I had to do Ol blue with the same treatment. Looks good.