I thought I could live with the deep scratches on the bottom of my front splitter courtesy of the previous owner but after 2 yrs it's time to change it up. The car is parked on a lift most of the time so it looks terrible. I am in Phoenix till the end of the month and would like to take a replacement back to Canada with me if possible....anyone in the area have a new or as-new one they would like to part with? Failing that, who should I contact for a replacement ? Thanks in advance!
Front splitter replacement
- Thread starter Cobraguy
- Start date
shelbyelite
PERMANENTLY BANNED
- May 10, 2007
- 1
BlackICE
GT Owner
viva gt
GT Owner
these prices are good for a new unit. canadian ford dealers will charge @ $340.00 retail.
[Thanks Gents......Blackice, the car is stock Ride height so I'm not sure where the previous owner was parking as I haven't made contact once.....Ed, how on earth did you go thru that many? ( how are you enjoying the arctic weather?)....Viva,thanks, I buy wholesale fleet thru Ford but I'd like to support a forum Vendor. So Shelby I'll call you ...and get you to ship to Phoenix if you can have it here next week. (Ill also purchase a few loose hot buttons as previously discussed)
QUOTE=shelbyelite;326855]I can get you a new one. They are not expensive (approx $200 - $250 )[/QUOTE]
QUOTE=shelbyelite;326855]I can get you a new one. They are not expensive (approx $200 - $250 )[/QUOTE]
DanQ
GT Owner
Be aware they are pretty big. I could measure the box if you need accurate info, but I'd guess the box is 5' x 2.5' x 0.5'
.
.
Xcentric
GT Owner
Dang! Those are so cheap I may buy one just because. I have about 1/2" clearance on my driveway. I found out I have negative clearance on my neighbor's (at first glance identical) driveway.
Thanks for the heads-up..... I trailored the car down so I've got plenty of room available. It's a 20 footer and the car ramps up and rides on 6" catwalks ( so i can open the door wide open over the fender) which allows plenty of storage under, in front and behind the car.
UOTE=DanQ;326879]Be aware they are pretty big. I could measure the box if you need accurate info, but I'd guess the box is 5' x 2.5' x 0.5'
.[/QUOTE]
UOTE=DanQ;326879]Be aware they are pretty big. I could measure the box if you need accurate info, but I'd guess the box is 5' x 2.5' x 0.5'
.[/QUOTE]
twobjshelbys
GT Owner
I'd been thinking of getting a spare along with the aftermarket diffusers. Rich put a new one on mine when he had it in the shop, but it's already gone a scrape. What is the part number for the splitter? It might be cheaper to get it from a dealer and pick it up than have it shipped since it is pretty large.
I don't know what the pt # is but Shelby is treating me well and shipping one to me for considerably less than one sourced in Canada would set me back. Since I have the room to drag it back home it's a no -brainer!
UOTE=twobjshelbys;326894]I'd been thinking of getting a spare along with the aftermarket diffusers. Rich put a new one on mine when he had it in the shop, but it's already gone a scrape. What is the part number for the splitter? It might be cheaper to get it from a dealer and pick it up than have it shipped since it is pretty large.[/QUOTE]
UOTE=twobjshelbys;326894]I'd been thinking of getting a spare along with the aftermarket diffusers. Rich put a new one on mine when he had it in the shop, but it's already gone a scrape. What is the part number for the splitter? It might be cheaper to get it from a dealer and pick it up than have it shipped since it is pretty large.[/QUOTE]
twobjshelbys
GT Owner