Search results

I actually had your plate on my list of options to use. I guess my list of well over 100 is now one less. Glad you now get most people to not ask if its real or what it is..

Depends on what you'd want to spend on a custom exhaust build if the German company won't/cant make you one from their catalog...... some worthy shops out there that I think would take it on.

Friggin well said. Wonder if the 3 point star up front being removed would even make it look better? Next time you start it, give it some herbs and I'll keep my ears pricked up here in FL. is the exhaust worthy of staying OEM

Im 6 foot tall and have a 6"6 reach and was easier to get the orangutang arm extension....now I lift the two hooks no probs long as the doors open... You're doing well to get hold of Rich. Ive sent emails and text to Jason Bourne and he's got back to me a few times...ha Hope to find what your...

My pass side front somehow lost its locking tab and I spotted it dangling out the side. Decided to fix (not really just put it back) it with my fix every thing butyl tape. Small blob on the broken section...... flex the sprung end in, and it's seated again. But if one was to actually have a...

I guess best bet is replace the volume out with the same new amount back in. Thanks for the info

Kendall if you disconnect the top line on the heat exchanger whilst the bottom drain plug is out won't that "relax" the system and allow the exchanger oil to flow to bottom/out?....... no mess this way Can you refill the 4.8 quarts through the top exchanger line (could be pretty slow) or do as...

Maybe turn up outside the parts department in the GT, rev the engine loudly for 10 sec. Storm in there and say "Right, lets order GT parts..... and don't you dare say the word Mustang when I say GT......OK"

Whilst I was returning the wrong stuff I had to order the right stuff that now costs about $53 now so about $10 more per bottle the 13 months ago It has to come from Miami (up to Orlando) they should've called me couple days ago on its arrival....grrrr I have a Cooltech trans cooler so need 3/4...

Done. Wasted an hour and have to wait few days for stuff to come up from Miami. Now about $53 a quart.

Thanks 99. I guess Im heading back to the parts department. Might have to get this deleted.....

Ford (not Motorcraft) lists a change to trans oil. Went to get some transmission oil and the computer in parts shows a change for the GT moving forward. Not sure when this change came into play?

6' 6" in heels

Not hard to pull the lower portion apart for shipping. Disconnect the seat belt active wire next to tunnel once seat is slid forward . You'll have to slide seat back and forward to get to the bolts in the floor (Torx 50. I used blue thread locker when I reinstalled and kept each bolt in its...

After finding out a 6' and change fella with a helmet on couldn't fit in the GT safely (for the odd track day) I decided to go with the lower drop from Knights upholstery. Its a charm and now my dome and helmet fits fine in a respectable seating position. Little harder to get out of the hole...

FYI... post #5 I did mine with clamshell off.... I lost a couple of bolts on OE exhaust as the nuts seized on and snapped. Maybe pre heat/lube them https://www.fordgtforum.com/forums/threads/long-the-removal-of-the-oem-muffler-w-o-removing-the-clamshell.3100/#post-191486

I hope you show a little respect and get her an Uber Black. See you in 20 seconds.

Can I ask why build a car from ground up?? How can you control the cost of piecing it all together? Or are you guys idiot savants that have an itch that needs scratching and morons like me just dont get it? How long does it take to build one. Stuart

FYI.... On seat lowering from Knights Cost for the seat lowering is $2,000 and about a week to do the change. email for Steve if you have any questions.... steve@tailoredbyknights.com Shipping address.. Steve Hemstock Knights Upholstery Inc. 1316 Marinette Ave. Marinette, WI. 54143

I had an old set of B-Stones on my 2000 M5 and decided they needed to be burnt up. Dropped the clutch and and of a sudden I hear "thump, thump" and I think Ive lost pressure or somethings broke. I look and find that Ive torn the middle strip of the tire partially off (about 12 inches long flap)...